Sennheiser Sound Field System EMP 2015 Manuel d'utilisateur télécharger pdf (Page 48)





Battery status indication

The red LED  and the 8-segment bargraph on the display provide

information on the battery status.

Bargraph:

The bargraph indicates the (remaining) battery capacity in 3 steps:

8 segments: the full battery capacity is available,

4 segments: the battery capacity is sufficient,

1 segment: the battery is going flat, immediately replace the battery.

Note:

When turning on the transmitter with a partially used battery, it is possible

that all eight segments may show for a short period of time – if this happens,

re-check battery status after a few moments.

Red LED:

Red LED lit up: The transmitter is turned on and the

battery capacity is sufficient.

Red LED starts flashing: The battery is going flat! You should

immediately replace the battery.

Peak indication

The yellow LED  at the top of the SK 500 transmitter lights up if the

audio signal at the microphone/line input  is excessively high (AF PEAK).

Note:

The sensitivity of the microphone/line input  can be adjusted via the

operating menu ( “Adjusting the sensitivity”).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

Pas de commentaire

Sennheiser Sound Field System EMP 2015 Manuel d'utilisateur Page 48